Commercial Doors & Services

Commercial & Industrial

Get a Free Quote!

Leave your name and email below along with what you are looking for in the message box. Or you can call us at 905-497-7677.

+ Additional cost for premium colours

* Only available in certain designs.

Colours

Premium Colours

Windows

Commercial G-5000

Features and benefits of G-5000

  • Steel
  • Thickness: 1 ¾”
  • 9 colors
  • Polyurethane sandwich door
  • R‑16 insulation
  • Panel design: Grooved

INSULATION OPTIONS

G-5138: R‑12, Thickness: 1 3⁄8″

G-5200: R‑18, Thickness: 2″

A

High-pressure injected polyurethane

  • Stronger and more energy-efficient insulation
  • Solidly bonded to the steel sheets providing a section that is resistant to flexion.

B

Sealed thermo-pane windows

  • Optimize insulation and reduce seal failures with galvanized steel spacer technology
  • Ensure a long lasting and refined appearance with one-piece molded polypropylene window frame.

C

InterlokTM triple-contact joints

  • Sections are strengthened by 2 steel walls joined together with mechanical interlocking joints which are more solid than just two bonded walls.
  • Mechanical thermal breaks which are more efficient compared to thermal breaks made with glue.
  • Triple-contact joints provide 2 times more weathertightness than those of the competition. Garaga Lab - Tested Logo

D

Metal reinforcement plates

  • Provide stronger fastening for hinges and struts. These 14-gauge plates are 2 times thicker than 20-gauge plates used by other manufacturers.

Wood end blocks

  • Provide a thermal break that is more effective than steel end caps which form a thermal bridge. Garaga Lab - Tested Logo

  • Structural elements of the sections, the kiln-dried pine wood end blocks are installed at the outer ends of the section. They are stronger than insulation covered with a steel cap.

F

Lag screw system

  • Provides much better fastening of the end hinges. The lag screws engage 8 threads into the wood, compared to a self-tapping screw going through a steel end cap engaging only about 2 or 3 threads.

 

1

Steel walls

  • 26/26-gauge, G60 hot-dipped galvanized steel with five coats of protective finish.
  • Baked-on polyester paint. Can be repainted.
  • Woodgrain finish on both sides of the door.
  • Same quality of corrosion-resistant steel for interior and exterior faces.

2

Insulated door with high-pressure injected polyurethane foam ensuring a high thermal-resistance rating and the solidity of a composite material.

  • G‑5000: 1 ¾” (44.5 mm), R‑16 (RSI 2.8 or k= 0.357 W/m2K)
  • G‑5138: 1 3⁄8″ (35 mm), R‑12 (RSI 2.1 or k= 0.476 W/m2K)
  • G‑5200: 2″ (50 mm), R‑18 (RSI 3.2 or k= 0.313 W/m2K)

3

InterLokTM joints between each section:

  • Mechanical joints ensure stronger sections with walls of each panel mechanically interlocked (not only bonded by the polyurethane).
  • Mechanical thermal break avoids heat transfer between the interior and exterior walls of each section.
  • Triple-contact joint prevents air infiltration.

4

U-shaped tubular bottom weatherstripping made of thermoplastic elastomer (TPE) ensures the weathertightness of the threshold. Remains flexible and watertight during cold weather, to -62°F (-52°C).

5

Wood end blocks made of kiln-dried pine (grade 4). With our lag screw system, ensure better fastening of the end hinges. They also provide a thermal break which prevents thermal bridging.

6

14-gauge steel reinforcement plates placed inside the door for solidly attaching hinges and struts.

Door weight:

G-5000: 1.90 lb/ft2 (9.3 kg/m2)

G-5138: 1.75 lb/ft2 (8.5 kg/m2)

G-5200: 1.95 lb/ft2 (9.5 kg/m2)

 

SIZES

 G-5000G-5138G-5200

Widths

In 1″ (25 mm) increments

From 4′ to 29’6″

(1.2 m to 9 m)

From 4′ to 18′

(1.2 m to 5.5 m)

From 4′ to 24′

(1.2 m to 9 m)

Heights

In 3″ (76 mm) increments

From 6′ to 24′

(1.8 m to 7.3 m)

From 6′ to 18′

(1.8 m to 5.5 m)

From 6′ to 24′

(1.8 m to 7.3 m)

  • 10 years against any perforation of steel due to rust
  • 10 years on the wood and blocks against cracking and rot
  • 10 years against delamination of the steel skin from the polyurethane foam
  • 1 year on other door components
  • 10 years against seal defects on Standard windows

Standard Windows Available for G-5000, G5138, G-5200.

Sizes

21″ x 13″ (533 mm x 330 mm)

Glass

  • Thermopane windows:
    • G‑5000: Clear, Satin, Wired, Tempered, Laminated or Tinted
    • G‑5138: Clear or Satin
    • G‑5200: Clear, Tempered 2 sides, Low‑E, Low‑E Tempered 2 sides
  • Single glass (3 mm):
    • G‑5000 and G‑5138: Clear or Satin

Frame colors

  • G‑5000: White, Desert Sand, Claystone, Dark Sand, Brown, Evergreen, Black and Charcoal
  • G‑5138: White, Desert Sand, Claystone, Dark Sand and Brown
  • G‑5200: White

Oval Windows available for G-5000.

Sizes

26″ x 13″ (660 mm x 330 mm)

Glass

  • Polycarbonate only

Frame color

Black

G-4400 Sections (Full Vision) Available for G-5000.

Glazing options

  • Windows are available in ⅛” Single Pane or ⅞” Thermopane in Glass, Polycarbonate or Acrylic. Also in ⅞” Fluted Polycarbonate in Thermopane and ⅝” Triple Wall Structure. Some glasses could be tempered.

Colors

White, Anodized, Black, Desert Sand, Claystone, Dark Sand, Moka Brown, Charcoal, Evergreen

Commercial G-4400

Features and benefits of G-4400

    • Full vision door
    • 3 colors
    • Thickness 1 ¾”
    • Aluminum frame
    • Non‑insulated

    PANEL DESIGNS

    Clear Anodized

    Clear Anodized with Kick Proof or

    Clear Anodized with Silver G‑5000 panel

    HARDWARE

    STEEL TRACKS

    • 2” (50 mm), 13‑gauge or 14‑gauge
    • 3” (76 mm), 12‑gauge

A

6 ¼” Tubular Extrusions

  • Built with 6 ¼” extrusion at perimeter (top, bottom and double hinge end) formore structural strength.
  • Less quantity of extrusions provide a more aesthetic and modern look. Thus, the windows are bigger to let in maximum light.

B

Choice of windows

  • More then 20 types of glass are available for a look that blends beautifully with the architectural style of the building.
  • Meets all safety requirements since most types of glass are offered tempered or non‑tempered.

C

Flawless finish

  • Highly precise finish of the assembly joints for a more attractive structure.
  • Built with thermo windows that completely cover up the spacer and the silicone glazing.

 

G-4400 Panel construction

1

1 ¾” (44.5 mm) thick door

  • Tubular aluminum extrusion (6063 T5), 1⁄16″ (1.6 mm) thick
  • Thicker extrusion 1⁄8″ (3.2 mm) at fastening points for more strength
  • 6 ¼” (159 mm) perimeter extrusion (top, bottom and double hinge end)
  • Rigid vinyl (PVC) pane molding

2

Weatherstripping between sections efficiently prevents air infiltration.

3

U‑shaped tubular bottom weatherstripping made of thermoplastic elastomer (TPE) ensures the weathertightness of the threshold R emains flexible and watertight during cold weather, to -62°F (-52°C).

4

Perimeter weatherstripping (jambs and lintel) Aluminum extrusion base with double‑edge weatherstripping in arctic vinyl.

5

Hinges equally spaced on the door for a better look.

6

Integral reinforcement strut for doors 12’3″ (3734 mm) wide and over.

IMPORTANT: The full vision door should not be used for insulation properties.

G-4400_EN
G-4400_EN
G-4400_PanelConstruction_EN
G-4400_PanelConstruction_EN
G-4400_ClearAnodized
G-4400_ClearAnodized
G-4400_ClearAnodized_SilverG-5000Panel
G-4400_ClearAnodized_SilverG-5000Panel
G-4400_ClearAnodizedKickProof
G-4400_ClearAnodizedKickProof

 

SIZES

Widths

In 1″ (25 mm) increments

From 4′ to 24′

(1.2 m to 7.3 m)

Heights

In 1″ (25 mm) increments

From 6′ to 18′

(1.8 m to 5.5 m)

Number of units per section1Widths
2

96” to 111”

(2438 mm to 2819 mm)

3

112” to 147”

(2845 mm to 3734 mm)

4

148” to 194”

(3759 mm to 4928 mm)

5

195” to 230”

(4953 mm to 5842 mm)

6

231” to 264”

(5867 mm to 6706 mm)

7265” to 288”

(6731 mm to 7315 mm)

  • WARRANTIES

    • 10 years against seal defects on Standard windows
    • 10 years against any perforation of aluminum due to rust
    • 1  year on other door components

The images shown may slightly vary from reality. Windows are available in ⅛” Single Pane or ⅞” Thermopane in Glass, Polycarbonate or Acrylic. Also in ⅞” Fluted Polycarbonate in Thermopane and ⅝” Triple Wall Structure. Some glasses could be tempered. Contact your garage door specialist for more details.

Standard Colours

Semi-custom Colours

Windows

Windows Layouts

Colours

Windows

Commercial S-24

Features and benefits of North Hatley SP design

    • Steel
    • Thickness: 2″
    • Colors: White or Ice White
    • 2 layers (polystyrene + vinyl backing (R‑5.4 or R‑6.6) OR Non‑Insulated​
    • Panel design: Deep Grooves​
Deep Grooved Steel Wall
Deep Grooved Steel Wall

A

Deep-grooved steel wall

  • Providing more strength and additional bending resistance, our sections are made with ½” deep and 2″ wide horizontal grooves with alternating smaller grooves.

B

Optional polystyrene insulation

  • For energy savings, polystyrene insulation protected with a vinyl backing is available.
Section Profile
Section Profile

C

Section profile

  • Rails are hemmed the entire length of the section for added sturdiness and dependability.

 

Center End Stiles
Center End Stiles

D

Center and end stiles

  • With a fully hemmed edge for added strength and safety, all stiles are pre‑punched with extruded holes for secure attachment of hinges and hardware components.
S-24_SN-24_S-24C_EN
S-24_SN-24_S-24C_EN

Hot-dipped galvanized steel wall

  • Baked-on polyester paint. Can be repainted
  • Corrosion resistant
 S-24SN-24S-24C
Exterior steel skin

24-gauge

25-gauge

24-gauge

Exterior side finish

Smooth

Smooth

Woodgrain

2

2” (50 mm) door

  • Optional CFC-free polystyrene insulation covered with a vinyl backing ensuring a thermal-resistance rating of R-5.4 (RSI 1.0 or k=1.000 W/m2K) for S-24 and SN-24 and R-6.6 (RSI 1.2 or k=0.860 W/m2K) for S-24C.

3

Sections are made with ½” (13 mm) deep and 2” (50 mm) wide grooves providing more strength to the door.

4

Tongue & groove joints between sections that fit seamlessly.

5

Bottom weatherstripping

S-24 and SN-24: continuous astragal made of U-shaped flexible vinyl and held in place by an aluminum retainer.

S-24C: continuous, flexible, semi-circular, U-Shape PVC.

6

Vertical center stiles

S-24 and SN-24: 18-gauge galvanized steel provides a rock solid base and the pre-punched holes help to affix hinges and struts. One edge is hemmed to add more strength to the section.

S-24C: 20-gauge galvanized steel attached by a Tog-L-Loc® joining system, with no welding and rivets, at hinge placement locations.

Door weight:

 S-24SN-24S-24C
Insulated

1.59 lb/ft2

(7.8 kg/m2)

1.50 lb/ft2

(7.3 kg/m2)

1.42 lb/ft2

(6.9 kg/m2)

Non-insulated

1.44 lb/ft2

(7.0 kg/m2)

1.34 lb/ft2

(6.5 kg/m2)

1.28 lb/ft2

(6.2 kg/m2)

Deep Grooves Garage Door
Deep Grooves Garage Door
Deep Grooves
1⁄2” deep, 2” wide
 

SIZES

 S-24SN-24S-24C
Widths

In 1″ (25 mm) increments

From 5′ to 30’2″

(1.2 m to 9.2 m)

From 5′ to 20’2″

(1.2 m to 6.1 m)

From 5′ to 24’2″

(1.5 m to 7.3 m)

Heights

In 3″ (76 mm) increments

From 6′ to 22′

(1.8 m to 6.7 m)

From 6′ to 14′

(1.8 m to 4.3 m)

From 8′ to 18′

(2.4 m to 5.5 m)

WARRANTIY (LIMITED)

1 year against structural failures

Standard Windows Available for S-24 AND SN-24

Sizes

24″ x 6″ (610 mm x 152 mm) or

25″ x 13″ (635 mm x 330 mm)

Glass

  • Thermopane ½”: Clear
  • Single glass 1⁄8″: Clear

Frame color

Black

Standard Windows available for S-24C.

Sizes

21″ x 13″ (533 mm x 330 mm)

Glass

  • Single glass 1⁄8″: Clear or Satin

Frame color

White

© 2020 Exclusive Garage Doors. Trademarks and brands are the property of their respective owners.